Admin Group Management

Purpose

Use this form to enable or disable the presentation of alarm information for the SDS Administrative Group.

WARNING: The Admin Group Management application is intended for Admin Groups of up to 20 nodes. If the number of nodes exceeds 20, then the application will stop processing ALL Multi-node Management (MNM) functions (such as Reach Through, Group Alarm information, Ftp Backup, etc.) for ALL nodes in the group. Two software logs are also generated: one when the 20-node threshold is reached and a second when it is exceeded. Reduce the number of nodes in the Admin Group to 20 or fewer to re-start MNM processing.

For more information:

• Fault Management - Description

• Multi-Node Management - Description

Conditions

• For Container-based MiVoice Business (cMiVB), Application Reach Through in MiVoice Business Release 9.1 or later is supported only with Multi Label Switching (MPLS) Point of Presence (POP).

• In a mixed cluster with pre-9.0 MiVoice Business systems, ensure the following:

NOTE: The following conditions do not apply to Container-based MiVoice Business (cMiVB).

• SNMP service status is enabled in the Server Manager.

• SNMPv2c community string for read-only access and SNMPv2c community string for read-write access in the Server Manager match Read Only Community and Read/Write Community in the SNMP Configuration form of the MiVoice Business systems running pre-9.0 software.

• SNMPv2c network access setting is set to All configured trusted networks in the Server Manager.

• The IP addresses and subnets of MiVoice Business systems running the pre-9.0 software are added to the trusted networks list in Configuration > Networks in the Server Manager.

Field Descriptions